This is a demo store. Any orders placed through this store will not be honored or fulfilled.

Welcome

Crystal Serum

More Views

Crystal Serum

Availability: In stock


  • 7 year guarantee

  • Ultimate in gloss enhancement, swirl and chemical resistance

  • Professional application only

Crystal Serum box

Crystal Serum 30ml

Crystal Serum box

Crystal Serum 50ml

Additional Information

Additional Information

MSDS

Take a look at the Material Safety Data Sheet for Crystal Serum

Application Information
Storage and use
 
  • Prepare your surface by removing any contaminants, and, or polish residues as this will ensure the highest density of cross-links between Crystal Serum and the surface of the vehicle.  For this we recommend using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth
     
  • Ensure that there is no risk of water dripping onto partially cured coating from trim parts or seals.  For this we recommend using an air line to blow any excess water from these areas. If water does drip recommend repolishing the affected area and reapplying Crystal Serum
     
  • Make sure the surface you are working on is cool, dry and out of direct sunlight – each panel should be between 5 and 30 degrees celcius
     
  • When applying the product always wear the gloves provided to prevent the product coming into contact with your skin
     
  • Use the pipette to put plenty of product onto the application pad
     
  • Replace the lid on the bottle and set aside (do not keep the bottle in your hand as this promotes premature curing)
     
  • Spread the coating over an area no larger than half a small panel or quarter of a large panel
     
  • The coating forms an almost immediate reaction with the surface of the vehicle so you should immediately remove residue with a Gtechniq MF1 ZeroR Microfibre Buff Cloth
     
  • You may need to buff the same area several times to fully remove residues for which we recommend using two MF1 cloths at any one time. Please note that you are only removing excess product so avoid buffing with too much force as this can marr softer paint finishes
     
  • For ease of spotting surface residue it is best to use a medium intensity flat light source and angling your head so that you view each surface from several oblique angels
     
  • Take care that the MF1 cloths you are using are rotated sufficiently and quickly so that Crystal Serum does not partially cure in the cloth, as this will make buffing residue significantly more difficult
     
  • We also recommend joining edges of coated areas ‘wet to wet’. For example if you are doing the roof, do the first side, and the other side immediately afterwards
     
  • If you miss removing residue and it cures fully you will need to carefully wet sand the affected panel, repolish and then reapply Crystal Serum. Unlike C1 Crystal Lacquer or EXO you cannot remove the fully cured film with a cutting compound
     
  • We recommend the vehicle stays dry for at least 12 hours post application
     
  • We do not recommend applying more than one layer of Crystal Serum, but for improved hydrophobic function, it can be layered with two coats of Gtechniq EXO – but you must all three hours for Serum to dry before applying
     
  • Immediately machine wash used MF1 cloths after use, but we advise not to use the same cloths again
     
  • An unopened bottle of Crystal Serum has a 12 month shelf life from the time of purchase. As soon as a bottle is open it needs to be used within 3 months - the pipette must be removed, cleaned and the cap replaced
Width in cm. No
Reviews
Product Description MSDS Application Information