- Additional Information
Take a look at the Material Safet Data Sheet for I1
Storage and use
To be used only in well ventilated working areas
Do not dilute
The surface to be treated must be exceptionally dry, free of dust and dirt, oils and fats
If the surface requires cleaning we recommend using a 1:10 dilution of Gtechniq W2 Universal Cleaner Concentrate but ensure the fabric is thoroughly dried after cleaning. For convertible roofs we recommend you leave to dry for at least 48 hours in good drying conditions before applying I1.
Work and apply at a temperature above 5 degrees celcius
Apply by spraying evenly from a distance of about 20 - 30cm ensuring thorough saturation and allow drying for approximately 2 - 3 hours. NB. You must ensure that your application is thorough as once dried you cannot apply a second coat as the first coat will repel additional product.
To avoid unsightly residue marks on non absorbent surfaces such as plastic trim, glass, leather and paintwork remove I1 with a microfibre cloth immediately after application or mask up these surfaces prior to application
After 24 hours the full effectiveness of this product is achieved
Once the coating has finished working it can be reapplied using the same procedure
The suitability and the colour-fastness of the material to be treated should be tested prior to the application of the product
Previously applied treatments can alter the effectiveness of the application
I1 Smart Fabric has a shelf life of 2 years from purchase, for best result, use within 1 year of opening
Width in cm. No